Homax Caulk Tip and Cap

    Caulk strips and tools · Caulk accessory

    Homax Caulk Tip and Cap

    Best for Resealing an open cartridge between jobs

    74 total reviews

    Regular price$7.50

    Opens our retail partner in a new tab. Payment, delivery and returns happen there.

    Size
    1/2, 1/4 and 1/8 in bead tips

    Features

    • Three tips for 1/2, 1/4 and 1/8 inch beads
    • Each tip molded at a 45 degree angle
    • Stackable tips switch bead size on one cartridge
    • Resealing cap for tubes and cartridges between jobs
    • Fits standard tubes and cartridges by hand
    • For caulk, adhesive and sealant

    Specifications

    BrandHomax
    Item number2406
    TypeCaulk accessory
    ShelfCaulk strips and tools
    Size1/2, 1/4 and 1/8 in bead tips

    For best results

    • Clean the tips right after use, before the material sets inside them.
    • Start with the smallest bead and step up only if the joint needs more.

    How to use

    1. Step 1Pick the bead size you need and screw that tip onto the tube.
    2. Step 2Run the bead with the angled tip held flat to the joint.
    3. Step 3Stack a larger or smaller tip when the joint changes width.
    4. Step 4Screw on the cap when you finish so the tube stays usable.

    About this product

    One tube, three bead sizes, and a cap for later

    Cutting a caulk nozzle is a one-way choice: cut too far and every bead runs fat. Homax Caulk Tip and Cap swaps that guess for three preformed tips that screw onto a standard tube or cartridge. They give you a 1/2, 1/4 or 1/8 inch bead, each molded at a 45 degree angle.

    The tips stack, so you can go from a small bead to a large one and back again on the same cartridge. When you stop for the day, the resealing cap keeps the open tube from drying out. The set works with caulk, adhesive and sealant, and you can reuse it on the next job.