Homax Adhesive Spreader, 1/4 in Notch

    Flooring trowels · Adhesive trowel · 1/4 in notch

    Homax Adhesive Spreader, 1/4 in Notch

    Best for Ceramic tile adhesive

    $5.40

    Opens our retail partner in a new tab. Payment, delivery and returns happen there.

    Width
    3 in
    Notch
    1/4 in

    Features

    • 3 inch wide spreader with 1/4 inch notches
    • Made for ceramic tile adhesive
    • Narrow enough for single tiles and small patches
    • Light high impact polystyrene body
    • Rinses clean for reuse

    Specifications

    BrandHomax
    TypeAdhesive trowel
    ShelfFlooring trowels
    Width3 in
    Notch1/4 in

    For best results

    • Use the notch your tile adhesive names, and switch tools if it asks for a deeper one.
    • Let the adhesive set as its label directs before you grout.

    How to use

    1. Step 1Clear the space where the tile goes and scrape out old adhesive.
    2. Step 2Spread adhesive with the flat side, then comb it with the notches.
    3. Step 3Press the tile into place with a slight twist.
    4. Step 4Wipe adhesive off the tile face and the spreader right away.

    About this product

    Setting a few ceramic tiles in a tight spot

    One cracked tile or a short backsplash does not call for a full-size trowel. This Homax spreader is only 3 inches wide, with 1/4 inch notches sized for ceramic tile adhesive. You can cover a small area or the back of a single tile without slopping adhesive onto the neighbors.

    It is yellow high impact polystyrene, light and comfortable in the hand, and you can rinse it and keep it for the next repair. For large floor tile, a wider spreader with a deeper notch is the better match, which is why this one earns its place in a repair kit.

    Compare the Adhesive Spreader, 1/4 in Notch with the 5 other products on the flooring trowels shelf, all part of Homax products.

    Other products for this job

    All flooring trowels