Filter
Filter
9 products
-
Caulk tool
Homax Perfect Bead Caulk Finisher
Best for: Shaping a bead with one pass
Regular price$5.20
-
Caulk strip · 1-5/8 in wide
Homax Extra Wide Peel and Stick Caulk Strip, 1-5/8 in
Best for: Wider gaps along a tub or shower base
Regular price$9.34 -
Caulk accessory
Homax Caulkeeper Caulk Caps, 2 Piece
Best for: Keeping an open tube from drying out
From Regular price$7.00 -
Caulk strip · 1-1/4 in wide
Homax Floor and Tub Caulk Strip, 1-1/4 in
Best for: Where the floor meets a tub or a wall
Regular price$16.32 -
Caulk accessory
Homax Caulk Tip and Cap
Best for: Resealing an open cartridge between jobs
Regular price$7.50 -
-
Caulk tool
Homax Caulk Finishing Tool
Best for: Smoothing a fresh bead into a clean, even line
Regular price$5.33 -
Caulk strip · 7/8 in wide
Homax Peel and Stick Caulk Strip, 7/8 in
Best for: A clean line where a tub or counter meets the wall
Regular price$6.95 -
Caulk tool
Homax Professional Caulk Tool Kit, 7 Piece
Best for: Every bead width from one kit
Regular price$15.99 - The whole guideEvery Homax product72 products from $1.82See them all
No product matches every filter you picked.
Strip or tube: which seam are you closing?
A caulk strip skips the tube altogether. You peel off the backing and press the pre-shaped strip into the corner where a tub or counter meets the wall. Homax makes three widths: the 7/8 in and 1-5/8 in strips come 11 ft long, and the 1-1/4 in floor and tub strip comes 5 ft long, in white silicone, for gaps up to 0.25 in. The extra wide strip has a molded score line that helps you set it straight against the surface. Measure the gap first and pick the width that covers it.
If you stay with tube caulk, the tools on this shelf cover each step. The Homax Caulk Remover has a sharp angled tip that you push forward and back to lift hard, dried caulk out of corners. The Caulk Tip and Cap screws onto a standard tube and gives you three bead sizes, 1/8, 1/4 and 1/2 in, each with a 45 degree angle. The Perfect Bead finisher smooths latex, silicone and acrylic caulk and carries the excess away. When you stop for the day, a Caulkeeper cap or the resealing cap keeps the open tube from drying out.
| Strip | Width | Length | Note |
|---|---|---|---|
| Peel and Stick Caulk Strip | 7/8 in | 11 ft | Tub or counter against a wall |
| Floor and Tub Caulk Strip | 1-1/4 in | 5 ft | White silicone, fills gaps up to 0.25 in |
| Extra Wide Peel and Stick Caulk Strip | 1-5/8 in | 11 ft | Molded score line for placement |
These 9 products are part of the Homax home repair line, from $5.20 to $16.32 in our last catalog update.
Questions
About Homax caulk strips and tools
Should you use a Homax caulk strip or tube caulk?
A strip is pre-shaped and peels and sticks into place, so you need no gun and no finishing tool. Its width is fixed, though, while a tube lets you choose the bead. If your gap is wider than a strip or runs around odd shapes, tube caulk and a finishing tool are the better fit.
How do you lift old caulk with the Homax Caulk Remover?
Its sharp angled tip digs into the corner, and you work it forward and back to loosen hard, dried caulk. It also cleans up the film left along the edges. The rubber handle helps your grip on a long run around a tub.
Which caulks can you smooth with the Homax Perfect Bead finisher?
Latex, silicone and acrylic caulks. You draw the finisher along the fresh bead, and it presses the caulk into the gap and removes the excess, so your fingers stay clean. It suits windows, tile and siding.
How do Homax caulk caps keep your open tube usable?
The Caulk Tip and Cap screws onto the tube and comes with a resealing cap, plus tips for 1/8, 1/4 and 1/2 in beads. Caulkeeper caps fit over the nozzle of a loaded gun between jobs. Either way, the caulk inside is kept from drying out while it waits.